Programmable Switching DC Power Supply
360W~1080W
Model: SPS5000X Series

Product Overview

 The SPS5000X-Series is a programmable Switching DC Power supply series that provides a wide range of output power using single-channel and multi-channel output configurations coupled with constant power capability. The series of power supplies includes sixteen models     with voltages to 160 VDC and power to 1080 W. The SPS5000X supplies can be connected in series (2 units) or in parallel (3 units) to meet the requirements of 0~320V and 0~270A, with a maximum combined power of 3240W.

The SPS5000X Series has a high brightness 2.4 inch OLED display, a user-friendly human-computer interface that enable easy control and performance monitoring. The SPS5000X provides high resolution voltage and current settings, adjustable slew rates, list sequence programming from the front panel or over the standard LAN/ USB interface, analog control, and over-voltage, current, power, and temperature protection. These features make the series an ideal choice for a variety of demanding markets, including Commercial Industrial, Education, Energy and Power Generation, laboratory general testing, the LED lighting industry, and automotive electronics.

Main Features 

Rated Output Voltage：40V, 50V, 80V, 160V

Rated Output Power：180W, 360W, 720W, 1080W

Wide range of output voltage and current, high efficiency power supply    CV, CC priority mode selection, better protection of equipment under test   Load transient recovery time (Load change from 50~100%) <1ms

Adjustable slew rate of output voltage and current   Setting and readback resolution: 1 mV, 1 mA

User enabled internal output discharge circuit to accelerate the down programming of the output voltage

Remote Voltage Sensing

List function up to 50 steps; can be created from the front panel or by importing list sequence files from a USB memory device

External analog voltage and resistor control of voltage or current output   External voltage and current monitoring output

OVP, OCP, LPP, OTP protection.

2.4-inch OLED high brightness liquid crystal display, 170-degree viewing angle   Standard Interface：USB, LAN, Analog Control Interface

Optional Interface：USB-GPIB module

1/2, 1/3, 1/6 rack mount size

Embedded Web Server offers remote control through a web browser without the need for the driver or software

CV/CC Priority Mode

When the SPS5000X series power supply is set to CC priority mode, at the power output-on stage, it is able to operate under CC priority to limit the inrush current spike and overshoot voltage effectively when the power output is turned on.
In CV priority mode, the output voltage reaches the set voltage value quickly. In some applications, such as LED testing, when the power output is started, the surge current and overshoot voltage will appear when the voltage reaches the on-state voltage of the LEDs.

Multiple Policy Protection Patterns

The protection functions of the power supply include over current protection (OCP), over voltage protection (OVP) and over temperature protection (OTP). If protection occurs, the power supply will turn off the output and enter protection mode. Protection can be released by pressing the Esc key for at least 2 seconds. Upon entering the Limited power protection (LPP), the system will start the power limitation mode, the maximum output power is about 105% of the rated power.

Ordering information

Click (Download Brochure) in RED above for more detail.

.