+6012-2100 344
Product Description
 |
Supply of Programmable DC Power Supply at low price |
|
CV / CC mode operation |
|
Two insulated variable output provided |
|
Fixed output that enables the selection of 5 V/ 2 A & 3.3 V/ 2 A is provided |
|
Fixed output that enables the selection of 15 V/ 1 A & 12 V/ 1 A is provided |
|
OUTPUT ON/OFF function provided |
|
Tracking Mode (two outputs controlled at the same time) provided |
|
Able to store and recall up to five operation states (Voltage, Current) |
|
19¡±Half x 2U slim size (less than 300 W) |
|
RS-232C attached by default (RS-485 Option) |
| Use the communication interface that is provided in the OPE Series! |
|
OPE Series provides RS-232C (RS-485 Option). This enables many functions such as control and data collection with the PC or PLC through RS-232C communication interface. Our company product enables programmer to produce application with ease by adopting standard SCPI programming language. Moreover, it is possible to develop the system with ease by using the application that is provided by our company. |
 |
Two channels can be controlled at once. If single channel power supply was supplied for each producer when it comes to your company¡¯s mass production system, replace it with the power supply in two channels that supports our company¡¯s tracking mode! There is no need to set up two channels¡¯ voltage and current which is cumbersome. Instead, pressing simply one button, the tracking mode button can set up two channels in the same way using only one setting for the voltage, current and all the functions. |
 |
This supports the state storage function. OPE Series can store and recall the voltage and current set by user. Even when a user is not an engineer, the user can use it easily for the production, product inspection, reliability test etc., with the Store and Recall function that set up and stored in advance. |
| OPE-185QI | OPE-303QI | OPE-305QI | OPE-503QI | ||
| Output rating | 0~ 18V, 0~5A 2CH | 0~ 30V, 0~3A 2CH | 0~ 30V, 0~5A 2CH | 0~ 50V, 0~3A 2CH | |
| Resolution Programming/Readback Display Meter |
6mV / 1.5mA 100mV / 10mA |
7.5mV / 1mA 100mV / 10mA |
7.5mV / 1.5mA 100mV / 10mA |
15mV / 1mA 100mV / 10mA |
|
| Programming Accuracy(@25 5 ) (%of output + offset) Voltage Current |
0.2% + 120mV 0.2% + 25mA |
0.2% + 200mV 0.2% + 15mA |
0.2% + 200mV 0.2% + 25mA |
0.2% + 300mV 0.2% + 15mA |
|
| Read-Back Accuracy (@25 5 ) (%of output + offset) Voltage Current |
0.2% + 120mV 0.2% + 25mA |
0.2% + 200mV 0.2% + 15mA |
0.2% + 200mV 0.2% + 25mA |
0.2% + 300mV 0.2% + 15mA |
|
| Ripple & Noise | 2mVp-p, 2mArms | 2mVp-p, 2mArms | 2mVp-p, 2mArms | 3mVp-p, 2mArms | |
| Voltage Programming Speed(No load) Rising time Falling time |
40ms 1.2s |
40ms 1.2s |
40ms 1.2s |
70ms 1.5s |
|
| Dimension(W x H x D / mm) | 213 x 88 x 362 | 213 x 88 x 362 | 213 x 88 x362 | 213 x 88 x 362 | |
| OPE-802QI | OPE-1001QI | OPE-1201QI | OPE-1501QI | ||
| Output rating | 0~ 80V, 0~2A 2CH | 0~ 100V, 0~1A 2CH | 0~ 120V, 0~1A 2CH | 0~ 15V, 0~1A 2CH | |
| Resolution Programming/Readback Display Meter |
100mV / 10mA | 1V / 10mA | 1V / 10mA | 1V / 10mA | |
| Programming Accuracy(@25 5 ) (%of output + offset) Voltage Current |
0.3% + 500mV 0.2% + 15mA |
0.5% + 800mV 0.2% + 15mA |
0.5% + 900mV 0.2% + 15mA |
0.5% + 900mV 0.2% + 15mA |
|
| Read-Back Accuracy (@25 5 ) (%of output + offset) Voltage Current |
0.3% + 500mV 0.2% + 15mA |
0.5% + 800mV 0.2% + 15mA |
0.5% + 900mV 0.2% + 15mA |
0.5% + 900mV 0.2% + 15mA |
|
| Ripple & Noise | 6mVp-p, 2mArms | 0.01%mVrms, 2mArms | 0.01%mVrms, 2mArms | 0.01%mVrms, 2mArms | |
| Voltage Programming Speed(No load) Rising time Falling time |
70ms 1.2s |
70ms 1.2s |
70ms 1.2s |
70ms 1.5s |
|
| Dimension(W x H x D / mm) | 213 x 88 x 362 | 213 x 88 x 362 | 213 x 88 x 362 | 213 x 88 x 362 | |
| 19 inch half x 2U size : 213mm(W) x 88mm(H) x 362mm(D) ** RS-232C | |||||
