+6012-2100 344
Product Description
- Integrate oscilloscope, serial trigger and decoder, spectrum analysis, data logger and multimeter functions into a convenient and portable design
- 100 MHz or 200 MHz bandwidth models
- Sampling rate of 1 GSa/s (single-channel), 500 MSa/s (two-channels)
- Record length up to 12 Mpts
- Waveform recording up to 22 hours
- IP Rating: IP51
Five in one
1. 2 CH Oscilloscope
2. True RMS Multi-meter
3. Recorder
2. True RMS Multi-meter
3. Recorder
- Sample Logger
- Measurement Logger
4. Serial Trigger and decode
5. FFT spectrum analysis
Portable and Easy to Use
The front panel size smaller than A4 paper reduces the size of the instrument, the rear panel support frame supports vertical placement, and the side nylon handles are convenient for handheld operation. The included carrying case has ample room for the instrument, probes and other accessories. Perfect for field work and carrying on business trips.
Higher protection level, longer battery life
The rechargeable 6900 mA high-capacity lithium battery is UL certified and delivers up to 5.5 hours of work without a charge, greatly improving safety and battery life. The battery can be charged in the cabin or removed and charged with an external charger.
IP51 certified
The handheld oscilloscopes feature a sealed IP51 dust and drip-proof housing and has been tested to IEC60529 to guarantee the ruggedness that is needed to survive harsh environments. A rubberized surface with large keys also makes it easy to use in difficult environments.
Specifications
| SHS810X | SHS820X | |||
| 100 MHz | 200 MHz | |||
| Sample rate (Max.) | Two-channel share a single 1 GSa/s ADC. When two channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel is active, that channel has a sample rate of 1 GSa/s | |||
| Channels | 2 analog oscilloscope channels, 1 multimeter channel | |||
| Memory depth (Max.) | 6 Mpts/CH (dual-channel mode),12 Mpts/CH (single channel mode) | |||
| Waveform capture rate (Max.) | 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode) | |||
| Trigger type | Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video | |||
| Serial Trigger and decoder | IIC, SPI, UART, CAN, LIN | |||
| Data Logger(Recorder) | Sample Logger. The Max sample rate is 25 kSa/s, the Min sample rate is 1 Sa/s | |||
| Measurement Logger. The Max interval is 10 minutes, the Min interval is 0.1second. The Max items of logging is 4 | ||||
| I/O | USB Host, USB Device | |||
| Max input Voltage (Scope) | CAT II 300 Vrms Between BNC Signal and Protecting Earth CAT II 30 Vrms Between BNC GND and Protecting Earth CAT II 300 Vrms Between BNC Signal and BNC GND | |||
| Max input Voltage (Meter) | CAT III 300 Vrms, CAT II 600 Vrms | |||
| Probe | PP510 | PP215 | ||
| Maximum Resolution | 6000 | |
| DC Voltage | 60 mV 600 mV-600 V |
±1%±15 digit ±1%±5 digit |
| AC Voltage(45 Hz～400 Hz) | 60 mV-750 V | ±1.5%±15 digit |
| DC Current | 60 mA-600 mA 6 A-10 A |
±1.5%±5 digit ±2%±5 digit |
| AC Current (45 Hz～400 Hz) | 60 mA 600 mA 6 A-10 A |
±1.5%±5 digit ±2%±5 digit ±3%±5 digit |
| Capacitance | 40 nF 400 nF-400 μF |
±3%±10 digit ±4%±5 digit) |
| Resistance | 600 Ω-6 MΩ 60 MΩ |
±1%±5 digit ±3%±5 digit |
| Continuity | Continuous beep when resistance < 50 Ω | |
| Diode | 0～2 V | |
| Display | 5.6-inch TFT-LCD (640×480) |
| Power Supply | Rechargeable 6900 mA high-capacity lithium battery |
| Weight | Without package 1.75 kg. With package 3.5 kg |
| Domesion | 276 mm * 168 mm * 68 mm |
| Accessories | Two Passive Probes,Multimeter pen,USB data cable,DC adapter,Power cord |
Model: SHS810X 100 MHz 2 CH 1 GSa/s 12 Mpts
Model: SHS820X 200 MHz 2 CH 1 GSa/s 12 Mpts
Click (Download Brochure) in RED above for more detail.
.
