+6012-2100 344
Product Description
100MHz DUAL CHANNEL OSCILLOSCOPE
Features
.100MHz bandwidth, dual channel, delayed sweep
.10 sets memory for front panel setting save & recall
.Cursor readout with 7 measurements
.Panel setup lock of digital-control functions
.Buzzer alarm
.Trigger signal output
.Z-Axis modulation input
.SMD technology, high stability and reliability
| Technical Data | CQ6103 | |||
| CRT | ||||
| Type | 6″ rectangle, internalgraticule, 0%, 10%, 90% and 100% marks | |||
| Display area | 8 x10DIV (DIV=10mm) | |||
| Accelerating potential | 16kV approx | |||
| Illumination | Continuously adjustable at front panel | |||
| Z-axis input | Coupling: DC | |||
| Sensitivity: 5V or more | ||||
| Maximum input voltage:30V(DC+AC peak) at 1kHz or less | ||||
| Bandwidth: DC~5MHz | ||||
| VERTICAL SYSTEM | ||||
| Sensitivity | 2mV~5V/DIV, 11 steps in 1-2-5 sequence | |||
| Sensitivity accuracy | ≤3% (5 div at the center of display) | |||
| Vernier vertical sensitivity | Countinuously variabble to 1/2.5 or less of panel-indicate value | |||
| Width of band (-3dB) | DC ~100MHz(2mV/div: DC~20MHz) | |||
| Rise time | 3.5ns (2mV/div:17.5ns) | |||
| Singal delay | Leading edge can be monitored | |||
| Input Coupling | AC, DC, GND | |||
| Input Impedance | 1Mμ±2% / Approx 25pF | |||
| Vertical mode | CH1, CH2, DUAL(CHOP/ALT), ADD, CH2 INV | |||
| Bandwidth limited | 20MHz | |||
| Common-mode rejection ratio | 50:1 or better at 50kHz | |||
| Dynamic range | 8 div at 100MHz | |||
| HORIZONTAL SYSTEM | ||||
| Horizontal modes | MAIN(A), ALT, DELAY(B) | |||
| A(main) sweep time |
50nS~0.2S/div, continuously variable(UNCAL) | |||
| B(delay) sweep time | 50ns~50ms/div | |||
| Sweep accuracy | ±3%, ±5% at x10MAG | |||
| Sweep magnificaton | x10MAG (maximum sweep time 5ns/div) | |||
| Delay time | 1us~5s | |||
| Delay jitter | Better than 1:20000 | |||
| Alternate separation | Variable | |||
| TRIGGER | ||||
| Mode | AUTO, NORM, TV | |||
| Source | CH1, CH2, EXT, LINE | |||
| Coupling | AC, DC, HFR, LFR | |||
| Slope | “+” or “-” polarity or TV sync polarity | |||
| Trigger sensitivity | Mode | Frequency | INT | EXT |
| Auto | 10Hz~20Mhz 20MHz~100MHz |
0.35div 1.5div |
50mV 150mV |
|
| Norm | DC~20MHz 20MHz~100MHz |
0.35div 1.5div |
50mV 150mV |
|
| TV | sync signal | 1div | 200mVpp | |
| TV sync | TV-V, TV-H | |||
| Max external input voltage | 400V(DC+AC peak) at 1kHz | |||
| External input impedance | 1Mμ±5% / approx. 25pF | |||
| X-Y OPERATION | ||||
| Mode | X-axis: selectable CH1, CH2, EXT Y-axis: selectable CH1, CH2, CH1 and CH2 |
|||
| Sensitivity and Accuracy | 2mV~5V/DIV, ±3%; EXT:0.1V/div±5% | |||
| X-axis bandwidth | DC~500kHz(-3dB) | |||
| Phase Error | 3° or less from DC~50kHz | |||
| OUTPUT SIGNAL | ||||
| Trigger signal output | Voltage: approx.25mV/div into 50Ω | |||
| Frequency response: DC~10MHz | ||||
| Calibrator output | 1kHz square wave, 2Vpp±2% | |||
| CURSOR READOUT FUNCTION | ||||
| Cursor measurement function | AV, AV%, AVdB, AT, 1/AT, AT%, Aѐ | |||
| Cursor resolution | 1/100 DIV | |||
| Effective cursor range | Vertical:±3 div; Horizontal: ±4 div | |||
| Panel setting display | Vertical: V/div(CH1, CH2), UNCAL, ALT/CHOP/ADD, INV, probe factor, AC/DC/GND Horizontal: s/div(MTB,DTB), UNCAL, x10MAG, delay time, HO Trigger: source, coupling, slope, level, TV-V, TV-H Others: X-Y, lock, save/recall MEM 0-9 |
|||
| SPECIAL FUNCTION | ||||
| TIME/DIV Auto range | Provided | |||
| Panel setting save & recall | 10 sets | |||
| Panel setups lock | Provided | |||
| POWER SOURCE | 110~127 VAC±10%, 220~240VAC±10%, 50Hz±2Hz / 60Hz±2Hz | |||
| ACCESSORIES | Instruction manual x 1, Power cable x 1, Probe x 2 ,Fuse x1 | |||
| DIMENSIONS & WEIGHT | 10(W) x 140(H) x 400(D)mm, Approx. 8kg | |||
For more detail, please download brochure as above
