+6012-2100 344
Product Description
- 200 MHz, 350 MHz bandwidth models
- Real-time sampling rate up to 2 GSa/s
- The newest generation of SPO technology
- Waveform capture rate up to 110,000 wfm/s (normal mode), and 400,000 wfm/s (sequence mode)
- Record length up to 28 Mpts
- Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time out (Dropout), Pattern
- Serial bus triggering and decoding (standard), supports protocols IIC, SPI, UART, CAN, LIN
- Video trigger, supports HDTV
-
Low background noise with voltage scales from 500μV/div to 10V/div
-
10 types of one-button shortcuts, supports Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print
- Segmented acquisition (Sequence) mode, divides the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time segment to capture qualifying events
- History waveform record (history) function (maximum recorded waveform length is 80,000 frames)
- Automatic measurement function for 38 parameters as well as Measurement Statistics, Zoom, Gating, Math, History and Reference functions
- 1 Mpt FFT
-
Math and measurement functions use all sampled data points in memory (up to 28 Mpts)
- Math functions (FFT, addition, subtraction, multiplication, division, integration, differential, square root)
- Preset key can be customized for user settings or factory “defaults”
-
Security Erase mode
-
High Speed hardware based Pass/ Fail function
-
16 Digital channels (MSO) (option)
-
Bode plot
-
Search and navigate
-
USB AWG module(option) USB WIFI adapter(option) Web Browser based control
- Large 7 inch TFT -LCD display with 800 * 480 resolution
-
Multiple interface types: USB Host, USB Device (USB -TMC), LAN, Pass / Fail, Trigger Out
- Supports SCPI remote control commands
-
VXI-11+SCPI, Telnet (port 5024) +SCPI and Socket (port 5025) +SCPI programming over LAN
-
Supports web control and virtual instrument control panel for both PC and mobile terminals
- Web control update rate of up-to 10 times/s provides nearly real-time update rate
- Supports Multi-language display and embedded online help
Product overview
SIGLENT’s new SDS2000X-E Series Super Phosphor Oscilloscopes are available in two bandwidths; 200 MHz and 350 MHz. They each have a maximum sampling rate of 2 GSa/s and a standard record length of 28 Mpts. The most commonly used functions can be accessed with its user-friendly one-button design.
The SDS2000X-E series employs a new generation of SPO technology. With its excellent signal fidelity, background noise is lower than similar products in the industry. It has a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/sec (sequence mode). It also employs a 256-level intensity grading display function and a color temperature display mode not found in other models in this class. Siglent’s newest oscilloscope offering supports multiple powerful triggering modes including serial bus triggering and decoding. History waveform recording and sequential triggering allow for extended waveform records to be captured, stored, and analyzed. Also included is the deep memory FFT. This math function uses up- to 1 M samples for the FFT calculation, providing the SDS2000X-E with very high frequency resolution. The hardware co-processor executes true fast measurement and math to all of 28M sample points so that there is minimal distortion on analysis. It also supports searching and navigating, on-screen Bode plot, 16 channel digital /MSO (optional), an external USB powered 25 MHz AWG function generator module (option), a USB WIFI adapter for wireless control and monitoring (option), and an embedded application that allows remote control via web browser. The features and high-performance of the SDS2000X-E oscilloscopes cannot be matched else anywhere at this price.
| Ordering information | ||
|
Product Name |
SDS2000X-E Series Digital Oscilloscope | |
| SDS2202X-E 200 MHz | ||
| SDS2352X-E 350 MHz | ||
|
Standard Accessories |
USB Cable -1 | |
| Quick Start -1 | ||
| Passive Probe -2 | ||
| Certification of Calibration -1 | ||
| Power Cord -1 | ||
| 16 Channels MSO Software | SDS2000X-E-16LA | |
|
Optional Accessories |
16 Channels Logic Analyzer | SLA1016 |
| AWG Software | SDS2000X-E-FG | |
| USB Isolated AWG Module Hardware | SAG1021I | |
| WIFI Software | SDS2000X-E-WIFI | |
| USB WIFI Adapter | TL_WN725N | |
| Isolated Front End | ISFE | |
| STB Demo Source | STB-3 | |
| High Voltage Probe | HPB4010 | |
|
Current Probes |
CP4020/CP4050/CP4070/CP4070A/CP5030/CP5030A/ CP5150/CP5500 | |
| Differential Probes | DPB4080/DPB5150/DPB5150A/DPB5700/DPB5700A | |
| Rack Mount | SDS1X-E-RMK | |
· higher measurement sensitivity and accuracy
· Variable excitation scan mode allowed for complex test scenarios of the power control loop test box
· User-friendly UI design
· List and cursor measurements, more intuitive
With hardware co-processor, faster data operations
1 M point FFT operation
Support Zoom, Gating, Math measurement and statistics
Support 38 automatic measurement functions
256-level Intensity Grading and Color Temperature Display
With a waveform capture rate of up to 400,000 wfm/s (sequence mode), the oscilloscope can easily capture the transients or low-probability events
Using max record length of up to 28 Mpts, users are able to oversample to capture for longer time periods at higher resolution
The waveform and data can be displayed at the same time and the detailed decoding information is displayed in the form of a list, and the data can be stored and exported.
MSO logic analyzer integration, mixed signal analysis tool
The combination of history and sequence mode, quickly capture abnormal waveforms
Hardware-based Pass/Fail mode for long-term monitoring signals
.
