+6012-2100 344
Product Description
Features
. 1GSa/s sampling rate
. 7 inch wide rectangle colour LCD
. 32 kinds of automatic measurement function
. FFT function
. Auto-setting for quick setup and waveform acquisition
. Advanced cursor modes: manual, auto and track
. 40k memory length
| Technical Data | DQ5072 | DQ5102 | DQ5202 |
| Display | |||
| Type | 7″ rectangle color LCD | ||
| Display resolution | 800 horizontal×480 vertical pixels | ||
| Display contrast | Adjustable | ||
| VERTICAL SYSTEM | |||
| Sensitivity and accuracy | 2mV / div~10V / div | ||
| Vertical resolution | 8 bit | ||
| Width of band (-3dB) | 70MHz | 100MHz | 200MHz |
| Rise time | ≤5ns | ≤3.5ns | ≤1.7ns |
| Sing-shot band width | 70MHz | 100MHz | 200MHz |
| Input coupling | DC , GND , AC | ||
| DC gain accuracy | ±3% (10mV/div~5V/div), ±4% (2mV/div~5mV/div) | ||
| HORIZONTAL SYSTEM | |||
| SEC/DIV range | 4ns/div~80s/div | 4ns/div~80s/div | 2ns/div~80s/div |
| Sampling rate range | 1G Sa/s | ||
| Waveform interplation | (Sinx)/x | ||
| Record length | 40k | ||
| Memory length | 25k (12.5k per channel) | ||
| Sampling rate and delay Time accuracy | ±50ppm over any ≥1ms time interval | ||
| Delta time Measurement accuracy | Single ± (1 sampling interval time+ 100ppm x rdg +0.6ns) Average ± (1 sampling interval time+ 100ppm x rdg +0.4ns) |
||
| TRIGGER SYSTEM | |||
| Acquisition Mode | AUTO, Normal, Single | ||
| Type | Edge, Pulse Width, Video, Slope, Overtime, Alternate trigger | ||
| Hold Off Range | 100ns~10s | ||
| MATH | +, -, ×, ÷ | ||
| FFT | |||
| ACQUIRE INPUT | |||
| Input coupling | DC, AC or GND | ||
| Input impedance | 1MΩ±2% 20pF±3pF | ||
| Probe attenuation | 1x 10x 100x 1000x | ||
| Max.input voltage | 300V (DC+AC peak, 1MΩ) Voltage difference (∆V) between cursors | ||
| MEASUREMENT | |||
| Cursor | Time difference (∆T) between cursors | ||
| Reciprocal of∆T in Hz (1/∆T) | |||
| AUTO-Measure | Frequency,Period,Mean,Pk-Pk,Cycil RMS,Min.,Max.,Rise time,Fall time,+Pluse width, -Pulse width,Delay1-2Rise,Delay1-2Fall,+Duty,-Duty,Vbase,Vtop,Vmid,Vamp, Overshoot,Preshoot,Preiod Mean,Preiod RMS,FOVShoot,RPREShoot,BWIDTH, FRF,FFR,LRR,LRF,LFR,LFF | ||
| I/O | |||
| Standard | USB(H) | ||
| CALIBRATOR SIGNAL | |||
| Output Voltage | 5V (≥1MΩload) | ||
| Output Frequency | 1 kHz | ||
| POWER SOURCE | 100~120V, 45Hz~440Hz; 121~ 240V, 45Hz~66Hz; 30VA Max; CAT II | ||
| ACCESSORIES | Operation manual, power cord, USB cable, probe×2, software CD-ROM | ||
| DIMENSIONS & WEIGHT | 313(W) × 108(H) × 142(D)mm, 2kg | ||
