+6012-2100 344


Name:   Password:

Products

PPM-3603D

ENQUIRY




Download Brochure

Programmable Linear DC Power Supply
Model: PPM Series

Categories: , , , .

 

 

PPM series are high precision programmable DC power supply with single output / dual range, output power rated from 108W to 375W with various model numbers. PPM series are featured with low regulation 0.01%, low ripple and noise 1mVrms, automatic continuous or dynamic load change, battery charge function. MPU control, RS232/USB interface for PC control, SCPI programming, the PPM series facilitates easy auto test system and remote control.

 

 

★ 0.01% low regulation, high accuracy & high resolution

★ Over load, over voltage, over current, over temperature and reverse polarity protections

★ CV and CC operations, auto CV and CC switch

★ Automatic continuous or dynamic load change

★ 1mVrms low ripple & noise

★ 4.3-inch mono LCD display

★ High speed rotary dial and keypad input

★ Built-in beeper alarm

★ Panel lock and output ON/OFF function

★ List mode function, 100 sets save & recall for voltage, current and time setups, easy use in auto test

★ Dual range output (only for PPM-3603D, PPM-3605D)

★ Remote sense function

★ Low resistance measurement function, display load resistance value

★ Battery charge mode

★ Standard RS232 interface, support SCPI commands, support Labview

★ Optional RS485 interface, support ModBus

★ Optional RS232-to-USB cable

★ Optional 0-5V analog control

 

 

 

Model PPM-3603D PPM-3605D PPM-3603 PPM-3605 PPM-6003
Rated output (0℃~40℃)
Voltage 0~36V 0~15V 0~36V 0~15V 0~36V 0~36V 0~60V
Current 0~3A 0~6A 0~5A 0~10A 0~3A 0~5A 0~3A
OVP 0.1~40V 0.1~40V 0.1~40V 0.1~40V 0.1~64V
OCP 0.1~6.5A 0.1~11A 0.1~3.5A 0.1~5.5A 0.1~3.5A
Constant Voltage Operation
Line regulation ≤0.01%+3mV
Load regulation ≤0.01%+3mV (I≤3A), ≤0.02%+5mV (I>3A)
Recovery time ≤100us (50% load change, minimum load 0.5A)
Ripple & Noise ≤1mV rms (I≤3A) (5Hz~1MHz), ≤2mV rms (I>3A) (5Hz~1MHz)
Temp. coefficient ≤100ppm/℃
Setting accuracy ±(0.03% of reading + 10mV) (25±5℃)
Setting resolution 1mV
Constant Current Operation
Line regulation ≤0.2%+3mA
Load regulation ≤0.2%+3mA (I≤3A), ≤0.2%+5mA (I>3A)
Ripple & Noise ≤3mA rms (I≤3A), ≤6mA rms (I>3A)
Setting accuracy ±(0.2% of reading + 10mA) (25±5℃)
Setting resolution 0.1mA 1mA 0.1mA 0.1mA 0.1mA
Display
Voltmeter 5 digits display
Ammeter 5 digits display
Voltage resolution 1mV
Current resolution 0.1mA 1mA 0.1mA 0.1mA 0.1mA
Reading accuracy Voltage: ±(0.02% of reading +5mV) (25±5℃)

Current: ±(0.05% of reading +5mA) (25±5℃)
Protection Over load, over voltage, over current, over temperature and reverse polarity protections
Remote sense Maximum compensation voltage 0.1V
Battery charge Lithium battery curve charge
Programming interface RS232 interface, support SCPI commands
Optional RS485 interface, support ModBus
Optional RS232-to-USB cable
Optional 0-5V analog control
Memory 100 sets
Insulation Between base and terminals: ≥20MΩ/500VDC

Between base and AC power cord: ≥20MΩ/500VDC
Operation environment Indoor use                Altitude: ≤2000m         Ambient temperature: 0~40℃

Relative humidity: ≤80%    Safety: grade II          Pollution degree: 2
Storage environment Ambient temperature: -10~70℃       Relative humidity: ≤70%
Power source AC110V/220V±10% selectable, 50/60Hz
Accessories Power cord x1, Operation manual x1, RS232 cable x1, Software CD x1, Test lead x1
Dimension 215(W)x89(H)x352(D)mm
Weight 8kg 8kg 6.8kg 6.8kg 8kg

 

 

  PPM-2010 PPM-3010 PPM-6005 PPM-7503 PPM-7505 PPM-12001
Rated output (0℃~40℃)
Voltage 0~20V 0~30V 0~60V 0~75V 0~75V 0~120V
Current 0~10A 0~10A 0~5A 0~3A 0~5A 0~1A
OVP 0.1~24V 0.1~34V 0.1~64V 0.1~80V 0.1~80V 0.1~132V
OCP 0.1~11A 0.1~11A 0.1~5.5A 0.1~3.5A 0.1~5.5A 0.1~1.1A
Constant Voltage Operation
Line regulation ≤0.01%+3mV
Load regulation ≤0.01%+3mV (I≤3A), ≤0.02%+5mV (I>3A)
Recovery time ≤100us (50% load change, minimum load 0.5A)
Ripple & Noise ≤1mV rms (I≤3A) (5Hz~1MHz), ≤2mV rms (I>3A) (5Hz~1MHz), ≤3mV rms (V≥75V)(5Hz~1MHz)
Temp. coefficient ≤100ppm/℃
Setting accuracy ±(0.03% of reading + 10mV) (25±5℃)
Setting resolution 1mV 1mV 1mV 2mV 2mV 10mV
Constant Current Operation
Line regulation ≤0.2%+3mA
Load regulation ≤0.2%+3mA (I≤3A), ≤0.2%+5mA (I>3A)
Ripple & Noise ≤3mA rms (I≤3A), ≤6mA rms (I>3A)
Setting accuracy ±(0.2% of reading + 10mA) (25±5℃)
Setting resolution 1mA 1mA 0.1mA 0.1mA 0.1mA 0.1mA
Display
Voltmeter 5 digits display
Ammeter 5 digits display
Voltage resolution 1mV 1mV 1mV 1mV 1mV  

≥100V: 10mV
Current resolution 1mA 1mA 0.1mA 0.1mA 0.1mA 0.1mA
Reading accuracy Voltage: ±(0.02% of reading +5mV) (25±5℃)

Current: ±(0.05% of reading +5mA) (25±5℃)
Protection Over load, over voltage, over current, over temperature and reverse polarity protections
Remote sense Maximum compensation voltage 0.1V
Battery charge Lithium battery curve charge
Programming interface RS232 interface, support SCPI commands
Optional RS485 interface, support ModBus
Optional RS232-to-USB cable
Optional 0-5V analog control
Memory 100 sets
Insulation Between base and terminals: ≥20MΩ/500VDC

Between base and AC power cord: ≥20MΩ/500VDC
Operation environment Indoor use                Altitude: ≤2000m         Ambient temperature: 0~40℃

Relative humidity: ≤80%    Safety: grade II          Pollution degree: 2
Storage environment Ambient temperature: -10~70℃       Relative humidity: ≤70%
Power source AC110V/220V±10% selectable, 50/60Hz
Accessories Power cord x1, Operation manual x1, RS232 cable x1, Software CD x1, Test lead x1
Dimension 215(W)x89(H)x352(D)mm
Weight 8kg 8kg 8kg 8kg 8kg 6.8kg

 

 

Model PPM–0830 PPM–1820 PPM-12003 PPM-3H12 PPM-5H07
Rated output (0℃~40℃)
Voltage 0~8V 0~18V 0~120V 0~300V 0~500V
Current 0~30A 0~20A 0~3A 0~1.2A 0~0.7A
OVP 0.1~10V 0.1~21V 0.1~140V 0.1~360V 0.1~550V
OCP 0.1~32A 0.1~22A 0.1~3.5A 0.01~1.32A 0.01~0.8A
Constant Voltage Operation
Line regulation ≤0.01%+3mV
Load regulation ≤0.01%+3mV (I≤3A), ≤0.02%+5mV (I>3A)
Recovery time ≤100us (50% load change, minimum load 0.5A)
Ripple & Noise ≤1mV rms

(5Hz~1MHz)

 ≤1mV rms

(5Hz~1MHz)

 ≤2.5mV rms

(5Hz~1MHz)

 ≤10mV rms

(5Hz~1MHz)

 ≤10mV rms

(5Hz~1MHz)
Temp. coefficient ≤100ppm/℃
Setting accuracy ±(0.03% of reading + 10mV) (25±5℃)
Setting resolution 1mV 1mV 10mV 10mV 10mV
Constant Current Operation
Line regulation ≤0.2%+3mA
Load regulation ≤0.05%+3mA (I≤3A), ≤0.05%+6mA (I>3A)
Ripple & Noise 10mA rms 5mA rms 1mA rms 1mA rms 1mA rms
Setting accuracy

(25±5℃)

 ±(0.2% of reading + 20mA) ±(0.2% of reading + 20mA) ±(0.2% of reading + 5mA) ±(0.2% of reading + 1mA) ±(0.2% of reading + 1mA)
Setting resolution 1mA 1mA 1mA 0.1mA 0.1mA
Display
Voltmeter 5 digits display
Ammeter 5 digits display
Voltage resolution 1mV 1mV 10mV 10mV 10mV
Current resolution 1mA 1mA 1mA 0.1mA 0.1mA
Reading accuracy

(25±5℃)

 Voltage: ±(0.02% of reading +5mV)

Current: ±(0.05% of reading +10mA)

 Voltage: ±(0.02% of reading +5mV) Current: ±(0.05% of reading +5mA)
Protection Over load, over voltage, over current, over temperature and reverse polarity protections
Remote sense Maximum compensation voltage 0.1V × ×
Battery charge Lithium battery curve charge
Programming interface RS232 interface, support SCPI commands
Optional RS485 interface, support ModBus
Optional RS232-to-USB cable
Optional 0-5V analog control × ×
Memory 100 sets
Insulation Between base and terminals: ≥20MΩ/500VDC

Between base and AC power cord: ≥20MΩ/500VDC
Operation environment Indoor use                Altitude: ≤2000m         Ambient temperature: 0~40℃

Relative humidity: ≤80%    Safety: grade II          Pollution degree: 2
Storage environment Ambient temperature: -10~70℃       Relative humidity: ≤70%
Power source AC110V/220V±10% selectable, 50/60Hz
Accessories Power cord x1, Operation manual x1, RS232 cable x1, Software CD x1 Power cord x1, Operation manual x1, RS232 cable x1, Software CD x1, Test lead x1
Dimension 215(W)x89(H)x412(D)mm
Weight 9.8kg 9.8kg 9.8kg 10.2kg 10.2kg

 

 

Click (Download Brochure) above for more detail

 

Product Description

 

 

PPM series are high precision programmable DC power supply with single output / dual range, output power rated from 108W to 375W with various model numbers. PPM series are featured with low regulation 0.01%, low ripple and noise 1mVrms, automatic continuous or dynamic load change, battery charge function. MPU control, RS232/USB interface for PC control, SCPI programming, the PPM series facilitates easy auto test system and remote control.

 

 

★ 0.01% low regulation, high accuracy & high resolution

★ Over load, over voltage, over current, over temperature and reverse polarity protections

★ CV and CC operations, auto CV and CC switch

★ Automatic continuous or dynamic load change

★ 1mVrms low ripple & noise

★ 4.3-inch mono LCD display

★ High speed rotary dial and keypad input

★ Built-in beeper alarm

★ Panel lock and output ON/OFF function

★ List mode function, 100 sets save & recall for voltage, current and time setups, easy use in auto test

★ Dual range output (only for PPM-3603D, PPM-3605D)

★ Remote sense function

★ Low resistance measurement function, display load resistance value

★ Battery charge mode

★ Standard RS232 interface, support SCPI commands, support Labview

★ Optional RS485 interface, support ModBus

★ Optional RS232-to-USB cable

★ Optional 0-5V analog control

 

 

 

Model PPM-3603D PPM-3605D PPM-3603 PPM-3605 PPM-6003
Rated output (0℃~40℃)
Voltage 0~36V 0~15V 0~36V 0~15V 0~36V 0~36V 0~60V
Current 0~3A 0~6A 0~5A 0~10A 0~3A 0~5A 0~3A
OVP 0.1~40V 0.1~40V 0.1~40V 0.1~40V 0.1~64V
OCP 0.1~6.5A 0.1~11A 0.1~3.5A 0.1~5.5A 0.1~3.5A
Constant Voltage Operation
Line regulation ≤0.01%+3mV
Load regulation ≤0.01%+3mV (I≤3A), ≤0.02%+5mV (I>3A)
Recovery time ≤100us (50% load change, minimum load 0.5A)
Ripple & Noise ≤1mV rms (I≤3A) (5Hz~1MHz), ≤2mV rms (I>3A) (5Hz~1MHz)
Temp. coefficient ≤100ppm/℃
Setting accuracy ±(0.03% of reading + 10mV) (25±5℃)
Setting resolution 1mV
Constant Current Operation
Line regulation ≤0.2%+3mA
Load regulation ≤0.2%+3mA (I≤3A), ≤0.2%+5mA (I>3A)
Ripple & Noise ≤3mA rms (I≤3A), ≤6mA rms (I>3A)
Setting accuracy ±(0.2% of reading + 10mA) (25±5℃)
Setting resolution 0.1mA 1mA 0.1mA 0.1mA 0.1mA
Display
Voltmeter 5 digits display
Ammeter 5 digits display
Voltage resolution 1mV
Current resolution 0.1mA 1mA 0.1mA 0.1mA 0.1mA
Reading accuracy Voltage: ±(0.02% of reading +5mV) (25±5℃)

Current: ±(0.05% of reading +5mA) (25±5℃)
Protection Over load, over voltage, over current, over temperature and reverse polarity protections
Remote sense Maximum compensation voltage 0.1V
Battery charge Lithium battery curve charge
Programming interface RS232 interface, support SCPI commands
Optional RS485 interface, support ModBus
Optional RS232-to-USB cable
Optional 0-5V analog control
Memory 100 sets
Insulation Between base and terminals: ≥20MΩ/500VDC

Between base and AC power cord: ≥20MΩ/500VDC
Operation environment Indoor use                Altitude: ≤2000m         Ambient temperature: 0~40℃

Relative humidity: ≤80%    Safety: grade II          Pollution degree: 2
Storage environment Ambient temperature: -10~70℃       Relative humidity: ≤70%
Power source AC110V/220V±10% selectable, 50/60Hz
Accessories Power cord x1, Operation manual x1, RS232 cable x1, Software CD x1, Test lead x1
Dimension 215(W)x89(H)x352(D)mm
Weight 8kg 8kg 6.8kg 6.8kg 8kg

 

 

  PPM-2010 PPM-3010 PPM-6005 PPM-7503 PPM-7505 PPM-12001
Rated output (0℃~40℃)
Voltage 0~20V 0~30V 0~60V 0~75V 0~75V 0~120V
Current 0~10A 0~10A 0~5A 0~3A 0~5A 0~1A
OVP 0.1~24V 0.1~34V 0.1~64V 0.1~80V 0.1~80V 0.1~132V
OCP 0.1~11A 0.1~11A 0.1~5.5A 0.1~3.5A 0.1~5.5A 0.1~1.1A
Constant Voltage Operation
Line regulation ≤0.01%+3mV
Load regulation ≤0.01%+3mV (I≤3A), ≤0.02%+5mV (I>3A)
Recovery time ≤100us (50% load change, minimum load 0.5A)
Ripple & Noise ≤1mV rms (I≤3A) (5Hz~1MHz), ≤2mV rms (I>3A) (5Hz~1MHz), ≤3mV rms (V≥75V)(5Hz~1MHz)
Temp. coefficient ≤100ppm/℃
Setting accuracy ±(0.03% of reading + 10mV) (25±5℃)
Setting resolution 1mV 1mV 1mV 2mV 2mV 10mV
Constant Current Operation
Line regulation ≤0.2%+3mA
Load regulation ≤0.2%+3mA (I≤3A), ≤0.2%+5mA (I>3A)
Ripple & Noise ≤3mA rms (I≤3A), ≤6mA rms (I>3A)
Setting accuracy ±(0.2% of reading + 10mA) (25±5℃)
Setting resolution 1mA 1mA 0.1mA 0.1mA 0.1mA 0.1mA
Display
Voltmeter 5 digits display
Ammeter 5 digits display
Voltage resolution 1mV 1mV 1mV 1mV 1mV  

≥100V: 10mV
Current resolution 1mA 1mA 0.1mA 0.1mA 0.1mA 0.1mA
Reading accuracy Voltage: ±(0.02% of reading +5mV) (25±5℃)

Current: ±(0.05% of reading +5mA) (25±5℃)
Protection Over load, over voltage, over current, over temperature and reverse polarity protections
Remote sense Maximum compensation voltage 0.1V
Battery charge Lithium battery curve charge
Programming interface RS232 interface, support SCPI commands
Optional RS485 interface, support ModBus
Optional RS232-to-USB cable
Optional 0-5V analog control
Memory 100 sets
Insulation Between base and terminals: ≥20MΩ/500VDC

Between base and AC power cord: ≥20MΩ/500VDC
Operation environment Indoor use                Altitude: ≤2000m         Ambient temperature: 0~40℃

Relative humidity: ≤80%    Safety: grade II          Pollution degree: 2
Storage environment Ambient temperature: -10~70℃       Relative humidity: ≤70%
Power source AC110V/220V±10% selectable, 50/60Hz
Accessories Power cord x1, Operation manual x1, RS232 cable x1, Software CD x1, Test lead x1
Dimension 215(W)x89(H)x352(D)mm
Weight 8kg 8kg 8kg 8kg 8kg 6.8kg

 

 

Model PPM–0830 PPM–1820 PPM-12003 PPM-3H12 PPM-5H07
Rated output (0℃~40℃)
Voltage 0~8V 0~18V 0~120V 0~300V 0~500V
Current 0~30A 0~20A 0~3A 0~1.2A 0~0.7A
OVP 0.1~10V 0.1~21V 0.1~140V 0.1~360V 0.1~550V
OCP 0.1~32A 0.1~22A 0.1~3.5A 0.01~1.32A 0.01~0.8A
Constant Voltage Operation
Line regulation ≤0.01%+3mV
Load regulation ≤0.01%+3mV (I≤3A), ≤0.02%+5mV (I>3A)
Recovery time ≤100us (50% load change, minimum load 0.5A)
Ripple & Noise ≤1mV rms

(5Hz~1MHz)

 ≤1mV rms

(5Hz~1MHz)

 ≤2.5mV rms

(5Hz~1MHz)

 ≤10mV rms

(5Hz~1MHz)

 ≤10mV rms

(5Hz~1MHz)
Temp. coefficient ≤100ppm/℃
Setting accuracy ±(0.03% of reading + 10mV) (25±5℃)
Setting resolution 1mV 1mV 10mV 10mV 10mV
Constant Current Operation
Line regulation ≤0.2%+3mA
Load regulation ≤0.05%+3mA (I≤3A), ≤0.05%+6mA (I>3A)
Ripple & Noise 10mA rms 5mA rms 1mA rms 1mA rms 1mA rms
Setting accuracy

(25±5℃)

 ±(0.2% of reading + 20mA) ±(0.2% of reading + 20mA) ±(0.2% of reading + 5mA) ±(0.2% of reading + 1mA) ±(0.2% of reading + 1mA)
Setting resolution 1mA 1mA 1mA 0.1mA 0.1mA
Display
Voltmeter 5 digits display
Ammeter 5 digits display
Voltage resolution 1mV 1mV 10mV 10mV 10mV
Current resolution 1mA 1mA 1mA 0.1mA 0.1mA
Reading accuracy

(25±5℃)

 Voltage: ±(0.02% of reading +5mV)

Current: ±(0.05% of reading +10mA)

 Voltage: ±(0.02% of reading +5mV) Current: ±(0.05% of reading +5mA)
Protection Over load, over voltage, over current, over temperature and reverse polarity protections
Remote sense Maximum compensation voltage 0.1V × ×
Battery charge Lithium battery curve charge
Programming interface RS232 interface, support SCPI commands
Optional RS485 interface, support ModBus
Optional RS232-to-USB cable
Optional 0-5V analog control × ×
Memory 100 sets
Insulation Between base and terminals: ≥20MΩ/500VDC

Between base and AC power cord: ≥20MΩ/500VDC
Operation environment Indoor use                Altitude: ≤2000m         Ambient temperature: 0~40℃

Relative humidity: ≤80%    Safety: grade II          Pollution degree: 2
Storage environment Ambient temperature: -10~70℃       Relative humidity: ≤70%
Power source AC110V/220V±10% selectable, 50/60Hz
Accessories Power cord x1, Operation manual x1, RS232 cable x1, Software CD x1 Power cord x1, Operation manual x1, RS232 cable x1, Software CD x1, Test lead x1
Dimension 215(W)x89(H)x412(D)mm
Weight 9.8kg 9.8kg 9.8kg 10.2kg 10.2kg

 

 

Click (Download Brochure) above for more detail

 

Related Products

  • ENQUIRY

    Handheld Particle Counter
    Model: 3888 & 3889

  • ENQUIRY

    Moisture Scanner
    Model: M72-SC

Category



Newsletter

© 2024 Advancom Electronics Technologies. All rights reserved.